Concrete and Mortar 
Exterior Waterproofing 
Professional Sealants 
Roof Waterproofing 
Substructure Waterproofing 
Tiling and Grouting 
Water Tanks and Other Areas 
Wet Areas 
Home
| PROPERTIES | STANDARD | RESULTS |
|---|---|---|
| Physical State | Liquid | |
| Setting Time (hour) | In House | 24 hours |
| Bond Strength (mPa) | Up to 3 mPa | |
| Vibration Dampening | Good |
- For bore packing
FAQ
What is Trubuild Boretite?
Trubuild Boretite is a high-performance, non-shrink, quick-setting cement-based compound used for sealing pipe penetrations, filling voids, and stopping active water leaks in concrete and masonry structures. It provides a durable, watertight seal around pipes, conduits, and utility lines passing through walls or floors.
What are the key features of Trubuild Boretite?
Trubuild Boretite is a fast-acting, easy-to-use pipe leakage sealant with the following key features:
- Quick setting and high early strength development
- Non-shrink and expansion properties for a tight, secure seal
- Excellent bonding to concrete, masonry, metal, and PVC
- Resistant to positive and negative hydrostatic pressure
- Suitable for sealing active water leaks and running water
- Chloride-free and non-corrosive to embedded metal parts
- Easy to mix and apply by hand or trowel
How does Trubuild Boretite stop pipe leakage and water infiltration?
When mixed with water, Trubuild Boretite forms a fast-setting, non-shrink mortar that expands slightly during the curing process. When packed tightly around the pipe or into the void, it quickly develops high strength and forms a dense, watertight seal that stops water infiltration and prevents further leakage.
What types of pipe penetrations can be sealed with Trubuild Boretite?
Trubuild Boretite is suitable for sealing various types of pipe penetrations, including:
- Concrete and masonry walls or floors
- Water supply and drainage pipes
- Electrical conduits and utility lines
- HVAC ducts and vents
- Cable trays and telecommunication lines
- Foundation and basement walls
- Manholes, sumps, and septic tanks
How is Trubuild Boretite applied as a pipe penetration sealant?
Trubuild Boretite is mixed with clean water to a stiff, putty-like consistency. The surface around the pipe penetration is cleaned and dampened. The mixed compound is then firmly packed into the annular space between the pipe and the wall or floor, ensuring complete filling and compaction. The surface can be smoothed with a trowel or finished to match the surrounding area.
What is the typical setting time of Trubuild Boretite?
Trubuild Boretite sets rapidly, with an initial set time of 1-2 minutes and a final set time of 3-5 minutes at 30°C. The exact setting time may vary depending on the ambient temperature, water content, and thickness of the application. Use only the amount of material that can be placed within the working time.
Can Trubuild Boretite be used for sealing active water leaks?
Yes, Trubuild Boretite is specially formulated to stop active water leaks and running water. The quick-setting and expanding properties allow it to plug the leaks and form a watertight seal even in the presence of flowing water. For high-pressure leaks, use a series of applications to gradually stop the water flow.
How long does Trubuild Boretite take to cure and achieve full strength?
Trubuild Boretite develops high early strength and achieves a significant portion of its ultimate strength within the first few hours. It reaches its full design strength in 28 days. The rapid strength gain allows for quick restoration of service and minimizes downtime.
Is Trubuild Boretite safe for use in potable water applications?
Yes, Trubuild Boretite is non-toxic, chloride-free, and safe for use in potable water applications when cured. It complies with the requirements of international standards for contact with drinking water and does not impart any taste, odor, or color to the water.
What are some other applications of Trubuild Boretite apart from pipe penetration sealing?
Apart from sealing pipe penetrations, Trubuild Boretite can be used for various other waterproofing and repair applications, such as:
- Filling voids, gaps, and cavities in concrete and masonry
- Plugging leaks in tanks, pools, and water retaining structures
- Anchoring bolts, fixtures, and equipment in concrete
- Repairing damaged or honeycombed concrete surfaces
- Sealing construction joints and cold joints in concrete
- Waterproofing and restoration of manholes and sewer lines
Related Products